Pink-colored products are becoming unisex, and in the world of PC builds, it is slowly gaining momentum. Many streamers are now switching towards non-vicious cute gaming setups consisting of the pink pc case to show off in live sessions. The subtle tone of pink shade can quickly change from being attractive to being downright ugly. Manufacturers carefully select the shade and material to make the whole setup look clean. However, after choosing a color, one must carefully evaluate the specs to ensure that they have enough space for cable management, good airflow, sufficient space for liquid cooling setup, PSU, and air-based CPU coolers clearance.
Inadequate airflow can lead to massive frame drops in gaming. Any online gamer would need smooth, consistent frames per second with no thermal throttling. Comprehensive front panel connectivity will always remain the most appreciated specs on any PC case. We have already selected every worthy pink PC case for our readers. These manufacturers have gained massive respect from the PC gaming community and videographers. We will be discussing each PC case in depth to evaluate the possible drawbacks and positive points that make them purchase-worthy. Let’s start with some tips:
Quick Shopping Tips
Front Panel: Front panel is crucial for ease of access. Most users rarely access the rear IO panel of the motherboard during their regular use unless you are a reviewer with a test bench. The front panel should contain a headphone jack, microphone jack, power button, reset switch, and comprehensive USB connectivity. It will make your everyday use more manageable and improve your overall productivity.
Air Flow: Airflow is critical to the performance of your PC. Low airflow leads to multiple problems like thermal throttling, performance degradation, bottleneck, and possibly an equipment failure. Careful evaluation of airflow direction and options to enhance airflow is essential. The ability to house adequate cooling solutions should be evaluated under a microscope.
Material: The proper material selection will lead to a solid frame and a transparent window that does not easily scratch. Some PC case manufacturers use higher gauge number sheet metals, leading to lower weight but cause wobbling structure of the PC case. We have made sure that the material of the listed products meets the minimum criteria of not being flimsy.
Clearances: The ability of the PC chassis to house a large graphics card, a big air-based CPU cooler, PSU, liquid cooler radiator, liquid reservoir, and cooling fans is essential. If you do not have enough clearance to install these components, you might face severe incompatibility issues and possibly have to replace your PC case to fit your PC components.
Best Pink PC Cases for Your Pink Computer RIG at a glance:
- Apevia Crusader-F-PK
- Golden Field MAGE-P
- Apevia Predator-PK
- Apevia Genesis Pro
- InWin A1 Plus
- Apevia Aura-F-PK
- Apevia PRODIGY-PK
- SilverStone SG13P
The Best Pink PC Cases for Your Pink Computer RIG You Can Buy Today
Apevia Crusader-F-PK
Best Overall Pink PC Case
SPECIFICATIONS
Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 2 x 3.5" & 2 x 2.5" | Included Fans: 4 RGB
REASONS TO BUY
✓ Magnetic top filter
✓ Tempered glass window
✓ Full front mesh for high airflow
REASONS TO AVOID
✗ No rubber grommets
✗ No front thermometer
Apevia Crusader-F-PK looks like a character out of a cartoon movie. Considering the price and features that this chassis offers, we think it’s the best overall Pink PC Case. It is a mid-tower chassis made with full metal and tempered glass windows; the front consists of a large grill with three RGB fans visible through the mesh. The back consists of another RGB fan, and all the RGB lighting can be controlled via a switch on the front panel. It comes with a shroud for PSU that can tuck away all the cabling that goes out of the PSU.
The rising use of USB Type-C ports in smartphones allows users to look for a PC case with a Type-C port on the front panel. Many motherboards now offer fast charging capability, and the rising wireless peripherals primarily utilize this fast charging capability for time-saving. There is no optical 5.25” drive bay which might be a letdown for some users who want to view some old DVDs lying around the house. There is no SSD mounting bracket support to increase the amount of storage. However, sufficient capacity is available for adequate storage.
It comes with a magnetic dust filter on top of the case that avoids dust from entering from the top if no fans are installed to exhaust air. It can seat a 360mm or a 240mm water cooling kit. There is room on the other side of the chassis where the wire can be tucked away from sight to give your complete build a clean look. We believe it’s the best pink PC chassis that money can buy.
Golden Field MAGE-P
Best Runner-Up Pink PC Case
SPECIFICATIONS
Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 320mm | Storage Support: 2 x 3.5"/2.5” & 6 x 2.5" | Included Fans: 3 RGB
REASONS TO BUY
✓ Sliding tempered glass side door
✓ Metal-mesh (front, bottom, and top)
✓ Rubber grommets for cable management
REASONS TO AVOID
✗ Static RGB colors
✗ No Type-C USB port
Golden Field MAGE-P is an excellent pc case made from 0.77mm SPCC material, ensuring durability. We have awarded it as the Best Runner-Up Pink PC Case. The case was never reported to be deformed when delivered. The surface paint quality is top-notch; you cannot scratch the surface paint unless you use an ax. You can be sure that when the product is delivered, it will be in its best condition. A sliding door made from tempered glass ensures no holes on the panel to ease access.
As a reviewer, we wanted to see a Type-C USB port in this case as it is now widely used, and most users will need it to charge their devices. The PC case color is on point, and the shade is perfect for a gaming setup, but the feet are odd. Unless you are going to place the case on the floor, you will have a hard time getting used to the silver color of the feet. The RGB fans are made for static color, and circulation patterns are not possible straight out of the box.
The all-pink color is attractive if you manage to find components that are also made from pink material. Many manufacturers are now producing pink-colored motherboard heatsinks to mesh together a theme that turns heads. A PSU shroud can be used as a stand to place your favorite cartoon character figure. Overall it is a decent case with good airflow from the front, top, and bottom.
Apevia Predator-PK
Best Pink Mid-Tower PC Case
SPECIFICATIONS
Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 3x3.5" & 2x2.5" | Included Fans: 4 RGB
REASONS TO BUY
✓ Four high-quality RGB fans
✓ Honeycombed full front mesh
✓ Easy to remove the front mesh
REASONS TO AVOID
✗ No screwless panel opening
✗ No whole side panel window
Apevia Predator-PK is a pink and black-themed PC case that will stand out on its own. It is the best pink Mid-Tower PC case with a front panel consisting of USB 3.0 and HD Audio ports alongside the power button and RGB lighting button. The honeycomb structure on the front prevents direct contact with the fans that sit right beneath the front panel. It also makes sure that your GPU, RAM, and CPU receive adequate airflow for cooling.
We noticed that the side panel does not cover the entire PC case, and only the partial area is covered with glass. To access the inside of your PC, you will need to unscrew the side panel for removal. The radiator is challenging to install at its intended position. The radiator hinders the front panel wiring or the storage device if you use a 240mm radiator. Liquid cooling with such large radiators is challenging to manage in this case.
It comes with options to change the RGB lighting via a button on the front panel. The pre-installed fans are made from high-quality material and have inner and outer rings that glow homogeneously. The black-colored interior helps mesh it with all the latest components in the market, so you are not left with limited performance options for your PC.
Apevia Genesis Pro
Best RGB-Fans Pink PC Case
SPECIFICATIONS
Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 3 x 3.5"/2.5” & 2 x 2.5" | Included Fans: 6
REASONS TO BUY
✓ Six pre-installed RGB fans
✓ Two see-through tempered glass
✓ The quick and easy mounting system
REASONS TO AVOID
✗ No front fan controller
✗ No 360mm radiator support
Apevia is known to make high-quality PC cases; when we talk about a pink PC case, that is all about making the impression. The subtle pink color with black shade allows the components assembled inside your chassis to stand out. Apevia Genesis Pro has the perfect combination of colors, and a ¾ side tempered glass from visibility. The front panel is present on the top of the case, allowing easy connectivity under the table.
There is no support for a 360mm radiator, so overclockers need to consider this before buying this PC case. There are no rubber grommets to make cable management even more delicate and unnoticeable. If you are looking to sync all the RGB fans with motherboard software or BIOS, it won’t be possible as there is no support for syncing. The RGB system runs independently. However, the RGB fans can be easily controlled via the front panel.
This case has a minimal footprint despite being a mid-tower PC case with two separate sections, one for hardware to show off and others to hide away all the clutter. If you need a high flow rate with Best RGB-Fans Pink PC Case, they have provided the front glass window with offset screws allowing air in from the sides. There is room to fit two 120mm fans on top of the case allowing hot air to escape quickly. PSU shroud tucks away the heat that is produced from supplying electricity.
InWin A1 Plus
Best Pink Premium PC Case
SPECIFICATIONS
Type: Mini ITX Tower | Motherboard Support: Mini-ITX | Card Length Supported: 320mm | Storage Support: 2 x 2.5" | Included Fans: 2
REASONS TO BUY
✓ HTPC with RGB sync
✓ Tinted transparent stand
✓ Top wireless charging station
REASONS TO AVOID
✗ No liquid reservoir space
✗ Only two 2.5” drive space
If you are looking for the best pink premium PC Case, you will buy the InWin A1 Plus if you are a fan of Mini-ITX motherboards that are also HTPC. It comes with an acrylic top, and it’s because of the wireless charging that it incorporates. The rising use of wireless charging of handheld devices is a must-have feature in this technological age. The beautiful implementation of RGB fans with an outer ring that glows in the right amount makes it look vicious and alive.
If you are a high-end gamer who owns the latest RTX 3000 series GPU, you will appreciate that this PC case supports a 320mm length. It is large enough to tuck in all the latest generation hardware. Installing a Mini-ITX with a 160mm height CPU cooler is possible with this case. However, there is no space for a liquid reservoir, so custom loops are not possible. You can install a liquid cooling solution with a 120mm radiator on the back of the casing.
This InWin PC case is, without a doubt, the best implementation of mini-ITX compatible chassis. They have made the RGB sync using Asus Aura, Gigabyte RGB Fusion, AsRock Polychrome, and MSI mystic. The fans are made of premium quality material and carefully constructed to precision. The tightly packed components can get very hot, and sometimes you need to take the side panel off. You will need to press just two buttons to take off the convenient side panel.
Apevia Aura-F-PK
Best Pink Frame PC Case
SPECIFICATIONS
Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 2 x 3.5"/2.5” & 2 x 2.5" | Included Fans: 4
REASONS TO BUY
✓ Full side tempered glass
✓ 165mm CPU cooler support
✓ High air flow with low noise operation
REASONS TO AVOID
✗ No optical drive slot
✗ Tight-fitting for 360mm radiator
Apevia Aura-F-PK is a low noise best pink frame PC case for gamers. It comes with two glass panels, one on the front and one on the side, to allow see-through for RGB fans and high-end PC components. The USB ports on the front panel are lower than in other cases, but RGB switch implementation is subtle, and a level-based mechanism works as a switch. Apevia has included two additional buttons that can be used for any other means.
The case is black from the inside, so we cannot call it a pink PC case, but it blends with most of the market component color schemes. It supports installing a 165mm CPU, which is large enough to install any big cooler that also features some overclocking headspace. We see that this PC case has small vents on the front of the PC case for airflow. The hindrance reduces noise levels significantly and causes the flow rate to drop, eventually causing heating issues.
We recommend that users buying this PC case use low TDP components and preferably avoid overclocking their components as the airflow is adequate for high-end PC components. If you use a liquid-based cooling solution, this PC case is ideal for operation as it is meant to be a quiet PC case. The included fans are RGB-based, but they cannot be synced with any motherboard to make the whole setup homogeneously lit, but they are definitely worth the money.
Apevia PRODIGY-PK
Best Pink Micro-ATX Case
SPECIFICATIONS
Type: Micro-ATX Tower | Motherboard Support: M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 2 x 3.5"/2.5” & 2 x 2.5" | Included Fans: 3
REASONS TO BUY
✓ Magnetic dusty filter for top
✓ Premium cable mnagement
✓ Top USB3.0/USB2.0/audio ports
REASONS TO AVOID
✗ No carry handles
✗ High noise levels
Apevia PRODIGY-PK is a pink pc case meant for gamers who want high airflow through their chassis while maintaining a small footprint on their gaming desks. The PC case has a large front mesh to allow air to pass through sufficiently cooling high TDP components like the GPU and in this CPU World. The PC case can house a 350mm graphic card. Because the RTX 3090, the best in the business graphic card, is 313mm, it can accommodate any large graphics card.
Being the Best Pink Micro-ATX Case, it has included three fans with the case. However, some users have reported them to be glitchy and not synced together or changing color together. With high airflow comes high noise levels; users will always have to trade off one for the other. This PC case is meant for HTPC and houses significant components essential to high-end gaming machines.
The top of the case is made from mesh supporting radiators and 120mm fans for heat removal. You can install a 240mm radiator for the liquid cooling kit. The pink shade is subtle and works with any gaming setup, and the small footprint on the desk makes it Instagram-friendly. The fans also have inner and outer ring RGB glow to give them a premium look. It is a value for money case.
SilverStone SG13P
Best Mini-ITX Pink Case
SPECIFICATIONS
Type: Mini-ITX Tower | Motherboard Support: Mini-ITX / Mini-DTX | Card Length Supported: | Storage Support: 240mm | Included Fans: None
REASONS TO BUY
✓ Elevated standoff included
✓ Horizontal top installation design
✓ Supports 2.5" and 3.5" hard drives
REASONS TO AVOID
✗ No PSU dust filter
✗ No external drive bays
Silverstone is known for its small case building. If you are looking for a horizontal case that makes the installation of motherboard and components a breeze, then SilverStone SG13P should be your way to go. This Mini-ITX / Mini-DTX compatible PC case is a high airflow PC case that adequately reduces the fans’ noise level. There are no fans included with the PC case, allowing users to install custom low noise fans for quiet operation.
The whole setup of this Best Mini-ITX Pink Case is made from riveting, which makes the components wabble during assembly and disassembly. Sheet Metal is made from a thin material, causing the overall case to appear sluggish when handled. There is no PSU dust filter, and the PSU length is also limited to 5.5”. You cannot install a graphic card that is above 300mm. RTX 3000 series GPU cannot fit inside this case.
The horizontal design allows this PC case to avoid any potential GPU sagging that could take place during its operation. The sagging GPU can lead to equipment damage. The PCIe slots are now reinforced to ensure that no creeping phenomenon occurs on slots, but all of this could be easily avoided using a horizontal setup.
Conclusion
We have featured many PC cases, but most of our list consists of cases manufactured by Apevia. It’s not because Apevia only has a pink PC case, but they offer the best value for money designs. The material is made from high quality, and thicker sheet metal is used for construction. If you are looking to go for a PC case with high airflow and higher noise is not a problem for you, then go for the PC case with a complete front mesh design. It will keep the high TDP components under normal operating temperature ranges.
However, if you are looking for a low noise PC case or quiet PC case, we recommend using a PC case that allows large radiator installation and small vents to allow air to flow. It will keep the noise level low as sound has small space to escape, and radiator-based liquid cooling is made for high TDP computer systems. You can select between different sizes depending on the PC case footprint you can afford on your desktop. The most standard measure is the Mid-Tower PC configuration with a high flow design.
